2007-03-08 05:28:19 · 6 answers · asked by Fruitful1 3 in Cars & Transportation ➔ Maintenance & Repairs
Depending on how far down it is,can you get a magnet tied to a string in there?
2007-03-08 05:31:23 · answer #1 · answered by tuppenybitz 7 · 0⤊ 2⤋
The tube the dip stick goes in is bolted to the engine, undo this bolt, pull tube out, remove dip stick and replace tube.
2007-03-08 13:33:24 · answer #2 · answered by James B 5 · 2⤊ 0⤋
if u cant reach it with somthing youll have tounbolt your oil pan from the bottom and it should come right out that end itll also be a good time to clean out the sludge and change the oil
2007-03-08 13:33:20 · answer #3 · answered by rlucio 3 · 0⤊ 1⤋
if you can see it,then try using a pair of needle nose pliers.if its broke off way down in,then you will have to take the tube out and get it.the tube should just pull right out.
2007-03-08 15:11:25 · answer #4 · answered by Anonymous · 0⤊ 0⤋
the tube that it slides into is removable (held on by usually 1 bolt...it has a rubber ring that it pushes into) ...
2007-03-08 13:34:29 · answer #5 · answered by Robert P 6 · 2⤊ 0⤋
depends how far down it is.you mite be able to get it out with needle nose pliers.
2007-03-08 13:32:27 · answer #6 · answered by my_mas0n 4 · 0⤊ 1⤋