it started when it hang and when i restart it it beep abnormally!.
the next day it try it, its works again but in the next time i use it the monitor has no input signal again and thats where my pc problem started and now its getting complicated the last i use my pc it keeps on restarting then the monitor doesn't work again until now!...
plzz help me??cause im really stuck right now!....tnx
sorry for my bad english....^_^
2007-03-07 20:52:06 · 7 answers · asked by PAmU 1 in Computers & Internet ➔ Hardware ➔ Monitors
VGA not working bad conection or card
2007-03-07 20:56:14 · answer #1 · answered by havenjohnny 6 · 0⤊ 0⤋
The problem may be with connectors or Mother board. Monitor seems to be OK. You can try to locate the poroblem by taking help from some experts. I have come across a site in the Internet that gives lot of cluesn computer problems,Try at http://www.computeraids.net/
2007-03-08 18:44:54 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Ok..this happened to my brother. His computer would beep strangely when it booted and there would be no video signal..
I think all he did was shut it off and wait, but that might not work for you. Something could be fried (i.e. the monitor, the cable, or the video card)
2007-03-07 20:58:27 · answer #3 · answered by Crazydog 4 · 0⤊ 0⤋
Pull the cmos battery and the ram modules to reset the bios. Put em back and try start it up. If your using a vid card you may have to switch your monitor over to the onboard until you can enable the card in your bios.
2007-03-07 21:45:57 · answer #4 · answered by jwplaster 4 · 0⤊ 0⤋
sounds like your graphics card is on the way out....try using someone elses monitor and or monitor cable to make sure if you havent already, if you still getting the same see if anyone has a graphics card you can try and go on from there....but it does sound like a graphics card problem if your monitor and cable are fine....good luck
2007-03-07 20:56:38 · answer #5 · answered by deni 5 · 0⤊ 0⤋
My 23" visual exhibit unit is geared up an analogous way and it can be used with 2 computing gadget's. i exploit port a million on the left this is the grasp one for the visual exhibit unit. The no sign might the two be on the subject of a detrimental connection to the visual exhibit unit or the video photos is out. If on the motherboard, then you particularly could use one in between the PCI ports on the motherboard. you in addition to mght might might desire to place in the video driving force or an upgraded video driving force. wish this grew to become into efficient.
2016-09-30 09:20:25 · answer #6 · answered by ? 4 · 0⤊ 0⤋
you may have missing or broken pins in connectors.
try another known good monitor or try the monitor on another system
if it is an onboard connection, try a cheap or extra graphic card.
2007-03-07 20:57:38 · answer #7 · answered by God's little helper 2 · 0⤊ 0⤋