i dont know which valve it goes in is it the blue one or the red one thats all i need to know thanx
2007-03-06 09:31:32 · 4 answers · asked by FELIX R 1 in Cars & Transportation ➔ Car Makes ➔ BMW
it's r-134a freeon someone help because i suck
2007-03-06 10:20:10 · update #1
Depends on the year of your car. If your car is before the early 90's, then it probably used R12 refrigerant. In this case, will need a professional to fill your system.
If not, your car is probably using R134a. In this case, it's a fairly simple fill using one of those DIY kits. (I think this also depends on which state you are in. Some states may have banned the DIY kits) You just hook up the hose from the refill can to the low pressure port. Watch the gauge and when it reads the correct pressure, you're done. Instructions should be included in the kits. I don't remember the exact psi off hand. Good luck.
2007-03-07 01:00:14 · answer #1 · answered by Anonymous · 0⤊ 0⤋
If you are talking about R12 refrigerant, you don't.
Only licensed, qualified persons should install R12 refrigerant. This is mandated by federal law. That you had to ask which valve to use demonstrates you are not qualified and by extension, unlicensed.
2007-03-06 09:37:40 · answer #2 · answered by Sevateem 4 · 0⤊ 0⤋
Um not sure you're allowed to pal
2007-03-06 10:04:04 · answer #3 · answered by USA_USA_USA 2 · 0⤊ 1⤋
watch Leathel Weapon II
2007-03-06 09:35:43 · answer #4 · answered by Proofoflife 3 · 0⤊ 2⤋