2007-03-06 07:26:22 · 3 answers · asked by b 2 in Cars & Transportation ➔ Maintenance & Repairs
Without knowing exactly what is causing sound failures it is hard to recommend a solution. However, you can by-pass the TV's sound by using a stereo. Pick up an inexpensive receiver, or use one from your stereo. You can try to use the RCA audio outputs on your TV, they might still work. If not, you can use the source unit such as a DVD player, or Cable box, whatever is giving the picture, and that should def have an audio output. At this point, your basically using the TV as a monitor and allowing the stero system to produce the sound. Thats how I run all my TV's, I get a better sound too.
2007-03-06 07:36:42 · answer #1 · answered by Anonymous · 0⤊ 0⤋
This happened once on my 1965 Zenith with a clicker remote. it's a beaut. I tore it all down then realized Harold (that's my nephew) turned the volume down and muted the sound......
Or the speaker could be shot. does it have audio out jacks, run them into an amplifier aux inputs and see if the sound works.
Be real careful as the high voltage in the back of a set can give you temporary paralysis or even kill you....This is not a funny matter. My brother had his left arm disabled for about a month after gettin in touch with his high voltage lead to the tube....
2007-03-06 15:41:20 · answer #2 · answered by Uncle Red 6 · 0⤊ 0⤋
You can open it up and check the wires going to the speaker and/or replace the speaker. Be very careful not to touch anything inside. Even if the TV is unplugged there are caps that will hold a charge strong enough to stop your heart.
2007-03-06 15:33:09 · answer #3 · answered by Anonymous · 0⤊ 0⤋