2007-03-06 04:12:25 · 4 answers · asked by lushes_2323_lushes_2323 1 in Computers & Internet ➔ Hardware ➔ Monitors
Make sure the cable connector is snug on the back of the computer with the computer off and reboot. I have a really old monitor, thought it was dying. I did notice the connector was ever so slightly ajar, pushed it flush, no change. Restart, and I guess, the video card was able to reestablish the synchonization rate. Everything was fine.
2007-03-06 04:22:16 · answer #1 · answered by Anonymous · 0⤊ 1⤋
If adjustments to the video card are unseccessful in fixing this, either the monitor needs adjusting or the monitor is going out.
Use the manual for your monitor to adjust the settings, and be sure to run the DeGauss at least once. This realigns the light jets in the back of the monitor and can help fix 'blurry' images.
2007-03-06 12:20:52 · answer #2 · answered by Marvinator 7 · 1⤊ 0⤋
Sounds like a video card problem. Try the moniter on a different computer. If it is a video card problem it should be easy to replace and you can get a decent basic video card for under $100.
2007-03-06 12:19:23 · answer #3 · answered by Matt!!! 3 · 0⤊ 0⤋
The inner components of receptor in the monitor probably died. Usually, you should buy the 19' LCD monitor because it's really affordable and worth it.
2007-03-06 12:17:38 · answer #4 · answered by mysteryhack 3 · 0⤊ 1⤋