The tank is already out and the inside of it looks clean. there is debris floating around in it. It has sat for a while and this is obviously not the first pump they have installed I say they because i just bought the truck yesterday I'm lookin for a cheap simple solution.
2007-03-06 03:56:06 · 6 answers · asked by Levi Y 1 in Cars & Transportation ➔ Maintenance & Repairs
I'm sorry Guys but ..................DON'T TAKE THE TANK APART ! AND DON'T USE ACID ON IT ! If the stuff in the tank is just floating around then tip the tank up on one corner and siphon the gas out of it. Then all you have to do is either get a rag on a stick and wipe the tank clean or let it dry and vacuum it out. If the tank is rusty inside then it should go to a shop to be boiled out and then resealed inside with a special coating that is not Patroleum solluable. or just find a better tank.
2007-03-06 04:10:13 · answer #1 · answered by huntnyou 4 · 0⤊ 0⤋
curiously somebody would not like the junk pumps answer. on a similar time as Musiclic gave you a great answer the different 2 adult males are directly to something. in the experience that your mechanic is employing factors from vehicle Zone it must be junk pumps. i've got considered it previously. If the pump is from NAPA or CarQuest then the pumps did no longer in all probability fail on their very own. you're cautioned to alter the wiring harness on those automobiles once you adjust the pump. Musiclic might then be the suited option with all of the grounding themes. a superb pump in this vehicle from the mechanic would be interior the $500 selection. If it rather is in basic terms a pair of hundred money then the different adult males are probable the suited option. Junk factors. additionally in case you have a tendency to run your gasoline each of how right down to the E and driving with the gasoline easy on then you definately are in all probability to be inflicting the pump to fail. GM automobiles are infamous for this. you elect gasoline interior the tank to maintain the pump cool. evaluate a million/4 tank to be empty and don't rigidity it around low on gasoline all of the time.
2016-12-18 16:32:34 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Take about a gallon of fresh gas, seal the tank up, shake it like its a matter of life and death, and then pour the gas out through a hole that allows you to remove the junk as well. Gas tanks can be a pain, but this has been what I've done with snowmobile tanks for years and I always get satisfactory results.
2007-03-06 04:05:24 · answer #3 · answered by graffiti62 3 · 0⤊ 0⤋
You can dump all the gass out and spray out with water let it dry then spray carbrator cleaner in evaporats fast.
2007-03-06 04:05:00 · answer #4 · answered by jeremy W 1 · 0⤊ 0⤋
Acid work wonders.
But be cautious as it burns.
2007-03-06 04:01:42 · answer #5 · answered by occluderx 4 · 0⤊ 1⤋
u gotta take it all apart.......sand blast......dry overnight at least.....there is no such thing as the corner-cutting solution u want.....
2007-03-06 03:59:30 · answer #6 · answered by Anonymous · 0⤊ 1⤋