water pressure is low when the hot water is on and returns when the cold is turned on, any ideas,help
2007-03-05 10:36:43 · 4 answers · asked by roberth1732 1 in Home & Garden ➔ Maintenance & Repairs
either the piping to and from the water heater is too small, or there is a restriction in the cold water valve feeding the water heater
2007-03-05 11:19:18 · answer #1 · answered by Eamonn S 3 · 0⤊ 0⤋
If it only happens in the shower, check the shower head to make sure it isn't stopped up by deposits. If it's all the fixtures in a single bathroom, it's the size of the waterlines that supply that bathroom. It could be that the service to the house is to small or that the municipality doesn;t supply you with very much pressure. If the later is the case your only option would be to add a booster pump to your house or check to make sure you don't have a pressure reducing valve stopping all the pressure. Check for that first. If you have one simply adjust it. Be carefull not to raise thepressure to much if you do have one. You could blow out all your water lines. Hope some of this helps.
2007-03-05 21:01:08 · answer #2 · answered by crackymcrackin 2 · 0⤊ 0⤋
you might want to check the rubbers in the faucets that supply the water to wheerever its low.
the hot water can swell the rubbers or carbon that closes the valve in the faucet, therefore it may be a simple one.
it just happened to me in my laundry sink!
2007-03-05 21:41:17 · answer #3 · answered by ticketoride04 5 · 0⤊ 0⤋
Water heater is plugged.
2007-03-05 18:52:59 · answer #4 · answered by BUBBA~THE~POOCH 3 · 0⤊ 1⤋