2007-03-05 07:53:38 · 6 answers · asked by willie 57 3 in Cars & Transportation ➔ Car Makes ➔ Peugeot
Drive in circles....
2007-03-05 13:36:49 · answer #1 · answered by Anonymous · 0⤊ 0⤋
i had a problem with my 206 indicator staying on and indicating randomly. peugeot wanted £80 for a new one and i wasnt prepared to pay that.
turned out the problem was that there was grease shorting the switch. easy problem to sort. just remove the switch block, open it up and wipe the contacts with a cotton bud. give that a try
2007-03-05 15:57:10 · answer #2 · answered by Anonymous · 0⤊ 0⤋
does it flash or stay on constant? if it's constant then it's the relay in the alarm control box (contacts have stuck together) you cant fix it but it may go off if you tap the control box lightly, else you will have to do what i do to all the others and cut the wire that comes from the alarm to the offending indicator. dont worry it will not affect the normal indicators so long as you do it close to the alarm box and insulate the loose ends of the wires.
2007-03-05 16:11:10 · answer #3 · answered by madass747 2 · 0⤊ 0⤋
My problem was with my vectra, the indicators came on when I took out the keys.
This problem was linked to a faulty circuit board thats connected to both alarm and central locking.
It could just be that you need a new indicator switch.
2007-03-05 15:57:33 · answer #4 · answered by ra88ie 2 · 0⤊ 0⤋
I thinks it's just a switch in the indicator arm, that get's knocked when the steering wheel is turned. Should be a simple matter of replacing arm.
2007-03-05 15:56:58 · answer #5 · answered by Dogsbody 5 · 0⤊ 0⤋
bad turnsignal bulb, brake light bulb, or driving light bulb, not headlight, but marker. turn on the lights just before the headlights come on and walk around the car and look for one not lit right, then turn on the left signals and check and the right signals and check, lastly have a friend do the brakes while you check.
2007-03-05 16:04:02 · answer #6 · answered by david_l_skipper 1 · 0⤊ 0⤋