I need to know if a 5 speed trandsmission in a 1990 s15 Ext. Cab. 4cylinder 2.5L will fit on a v6 2.8L and match up on the bell housing or will I need an adapter plate between the trany and motor?
2007-03-05 02:03:16 · 4 answers · asked by santobugito 7 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
the motor and trans will bolt together without any adapter plates.l chevy was wonderful to us by making 99% of the bellhousing patterns the same. be sure to measure the length of the trans and also check to see if the output shafts are the same.
2007-03-05 02:37:29 · answer #1 · answered by hotrod92rs 2 · 0⤊ 0⤋
you can use the same bell housing just bolt the trans. up to the old bell housing if u need a clutch go ahead an change that while you have it out...only ones that don't work is the 4.3
2007-03-05 17:33:17 · answer #2 · answered by annouyed 1 · 0⤊ 0⤋
Since those two engines are totally different, I seriously doubt the transmission will fit. But you can call your local Chevy dealer and ask the service manager.
2007-03-05 10:07:15 · answer #3 · answered by JeffyB 7 · 0⤊ 0⤋
No adaptor plate needed. It will bolt right up. Why you would want to do that is the real question.
2007-03-05 10:15:17 · answer #4 · answered by rollinjukebox 4 · 0⤊ 0⤋