2007-03-04 14:14:09 · 8 answers · asked by Jerry B 1 in Computers & Internet ➔ Hardware ➔ Desktops
it's the memory's clock frequency (100MHz vs 133MHz). 133MHz will usually be compatible with boards that take 100MHz, but will slow itself down. This can create a bottleneck unless you overclock the bus to operate at this frequency.
2007-03-04 14:18:15 · answer #1 · answered by d3v10u5b0y 6 · 0⤊ 0⤋
I believe the PC133 is a little faster. Some computers are limited with the 133 - some can take both.
2007-03-04 14:17:51 · answer #2 · answered by longhats 5 · 0⤊ 0⤋
you mustn't use the stick of RAM. Such RAM is frequently BACKWARD nicely matched yet not forward nicely matched. Use a PC133 in a PC100 device... do not use a PC100 in a PC133 device. Pentium III 866 chips run at 133 MHz - the RAM must be waiting to do an analogous.
2016-10-17 07:11:44 · answer #3 · answered by juart 4 · 0⤊ 0⤋
It's the speed of your RAM. It's also the type of ram your mother board will accept and the speed at which the mother board "talks" to your RAM. The speeds you're listing work well in a pentium III (3) or lower mother board. Today's RAM is substantially faster.
2007-03-04 14:21:09 · answer #4 · answered by Hahn 2 · 0⤊ 0⤋
same chip format, but PC133 is faster by 33Mhz
2007-03-04 14:18:08 · answer #5 · answered by Tael 2 · 0⤊ 0⤋
actualy these r SD RAMs. 100 and 133 is Mgh speed of ur RAM.
2007-03-04 14:17:25 · answer #6 · answered by Anonymous · 0⤊ 0⤋
The speed that the bother board runs at.
2007-03-04 14:16:12 · answer #7 · answered by Anonymous · 0⤊ 1⤋
really it is just 33MH. That is it. its really old ram now, its half the spead of origoinal DDR ram.
2007-03-04 14:19:00 · answer #8 · answered by Anonymous · 0⤊ 1⤋