what I want to know is how much horsepower I will have.I'm puting a Lunati 262 dur.499 lift cam, 650 holly carb,a edelbrock rpm intake plus the 1970 351 heads plus it will be bored 30 over to 306 my engine is a 1988 302 it will have flat top pistons in it.Please help thanks.
2007-03-04 12:41:43 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
I'm not sure those heads will work on the later 302. The early 351s had a different intake bolt pattern. If they do work you should see around 290 hp.
2007-03-04 12:53:11 · answer #1 · answered by mad_mav70 6 · 0⤊ 0⤋
applicable, of path they're made at diverse flowers, in spite of the undeniable fact that the Cleveland is a actual extra advantageous engine, the heads are diverse, The 351C quite has 2 contraptions distinctively diverse heads, the cleveland is likewise extra advantageous in all possibility to have 4 bolt mains. The Cleveland additionally has diverse radiator hose routing. The Boss 351 is very a Windsor with Cleveland substantial bearings. opposite to what the 1st reaction stated, all 3 are patently Ford engines. Edit: to make clean, The Boss 351 i'm concerning is the only at modern offered in the Ford Racing catalog, now no longer the only that became used in the Mustang in the late 60's and early 70's, it fairly is a Cleveland.
2016-12-14 10:49:49 · answer #2 · answered by ? 4 · 0⤊ 0⤋
About 300 This coud be a liitle high. You will need to get a different intake manifold if it is for the 302. Possibly have the bottom flange machined if the front and rear seals are to snug. Use a electronic ignition too.
2007-03-04 12:53:08 · answer #3 · answered by Worker Drone 4442002 2 · 0⤊ 1⤋
I just ask my husband and he said you should be pushing about 309- 400 horses. You go man!!!!
2007-03-04 12:51:42 · answer #4 · answered by latasha 2 · 0⤊ 0⤋