Through internet browser, type 192.168.1.1, or 192.168.10.1
Enter password, the default is usually
User name: admin
Password: password
Then look under the wireless tab to find your wep key.
To connect to your router, you will need to be wired to it, "ethernet cable", if you dont know the wep key, then once you get the key you can go wireless.....
2007-03-04 12:12:40
·
answer #1
·
answered by Vincent 6
·
0⤊
0⤋
You have to log into your router. Open up IE and in the address bar type the following: http://192.168.1.1. You'll be asked for your user name and password. Then you can change or see your WEP key in the configuration of the router.
2007-03-04 12:14:22
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
It depends on your router, I believe..... open your paperwork or go on line to your manufacturer. You just type in an address (numbers) on the internet to get into your router. Different routers have different numbers. Should be in your paperwork. Then you'll have a log on and I believe, with Netgear, it's logon is Admin and password is admin or 1234...... (been a while so I'd have to look).
2007-03-04 12:13:22
·
answer #3
·
answered by longhats 5
·
0⤊
0⤋
your router is not in the computer its on the desk or on the floor a router dose not go in a computer
2007-03-04 12:12:37
·
answer #4
·
answered by me and you 6
·
0⤊
0⤋
rind out your gateway and type that into your http browser.
Go to Start, run -> type cmd, press enter
type ipconfig, press enter
note default gateway ip, e.g. 192.168.0.1
open browser
type in http://the ip of default gateway, e.g. http://192.168.0.1
2007-03-04 12:36:28
·
answer #5
·
answered by christian 1
·
0⤊
0⤋