i know it has 30 splined axles is 5 on 5 bolt pattern took 10 bolts to remove back cover
2007-03-03 15:51:49 · 4 answers · asked by demoman76 1 in Cars & Transportation ➔ Other - Cars & Transportation
i know it has 30 spline axles took ten bolts to remove back cover i have the numbers off the ring gear if that help and has c clip axles no build sheet or metal tag
2007-03-03 16:04:19 · update #1
i know it has 30 spline axles took ten bolts to remove back cover i have the numbers off the ring gear if that help and has c clip axles no build sheet or metal tag
2007-03-03 16:04:30 · update #2
TRY TO LOCATE THE BUILD SHEET IT SHOULD BE UNDER THE REAR SEAT IN THE SPRINGS. ALSO SOME GMS HAD A METAL TAB ON THE 10 BOLT INSPECTION PLATE.
2007-03-03 15:58:16 · answer #1 · answered by clydedernitt 3 · 0⤊ 0⤋
I'm going to guess at it ,if you don't have that metal tag that was on the rear cover,then all i can do is guess at it,but i,ll say a 323 or a 355 in it,that was a popular one for that model,good luck.
2007-03-03 23:59:19 · answer #2 · answered by dodge man 7 · 0⤊ 0⤋
look for a metal tag on the rear end cover. then ask a gm dealer which rear end and ratio you have.
2007-03-03 23:56:03 · answer #3 · answered by pokey2826 1 · 0⤊ 0⤋
ring gears have numbers!
2007-03-03 23:57:27 · answer #4 · answered by whitnei w 1 · 0⤊ 0⤋