replaced the motor for my wipers on my 1998 nissan quest they worked fine for about 5 minutes then went dead everything was replaced exactly as it was and checked the fuses , could it be a short or switch .
2007-03-03 10:07:42 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
There seems to be too much DRAG in the wiper system. I would disconnect the wipers from the motor and move the arm by hand. You may need to grease the mechanism. Also, when testing, you may want to "wet" the windshield. If the drag or mechanical resistance is too great, a breaker may be tripped or the wiper motor may not be able to over come it. Check the friction or drag in the system first.
2007-03-03 10:15:40 · answer #1 · answered by Anonymous · 0⤊ 0⤋
it could be the switch.run a wire from the battery to the wiper motor and see if they work.if they do,then replace the switch.
2007-03-03 10:52:29 · answer #2 · answered by Anonymous · 0⤊ 0⤋
i say it switch, are a bad wiper motor, even tho it new you do get bad one, al so check the wires that hook to the motor
2007-03-03 10:34:39 · answer #3 · answered by ghostwalker077 6 · 0⤊ 0⤋
check the connections. chances are u didnt get the wires back on tight enough. u can check the motor by hotwiring it to battery. if it is ok then bad connection, short or bad switch.
2007-03-03 10:12:54 · answer #4 · answered by robert s 5 · 0⤊ 0⤋