I just replaced my dead motherboard with an identical replacement, but I'm getting no video off of the same card I was using before. I've tried the usual, unseat and reseat the card, and reseating the RAM, and all that, but I'm getting nothing. It sounds like the computer is going through the whole boot process just from the hard drive clicking, but other than that, nothing comes on screen.
It's an Intel D945Pvs motherboard, Intel Pentium D 840 3.2 GHz processor, 1 GB DDR2 533MHz RAM, 120 GB SATA HDD, and nVidia GeForce 6200 LE graphics card, connected through DVI.
2007-03-02 07:07:52 · 3 answers · asked by Kevin 3 in Computers & Internet ➔ Hardware ➔ Desktops
It's a PCI-e card.
2007-03-02 07:15:28 · update #1
Can't check the drivers, I have NO VIDEO. Also, I've already tried reseating the card.
2007-03-02 07:21:06 · update #2
I would re-seat the video card if it's an AGP card, or reseat it in another slot if it's PCI.
2007-03-02 07:13:43 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Hi
Insert The Mother Board CD. And Installed the Dispaly Driver and The Audio Driver After that U get the Video and Audio..
If U Insatalled the Drivers u Check The Hardware is Correct or Not.like Connective Wire And Pins.
2007-03-02 07:25:04 · answer #2 · answered by raj k 2 · 0⤊ 0⤋
checked the drivers? also check physical connection ... cables and stuff and yes try to re-seat maybe its not plugged in tightly on the pci-e port..
2007-03-02 07:19:21 · answer #3 · answered by Toji 2 · 0⤊ 0⤋