I have two large pine trees, 6 inches in diameter, and about 20 feet tall. I want to remove them myself, if I can. How do I do it? Is it possible?
2007-03-02 06:00:06 · 6 answers · asked by Danielle 2 in Home & Garden ➔ Garden & Landscape
put a rope in them then notch the tree and fell them.if you do not the room to fell them,call a professional if they have to be climed this is not a job for a rookie,you may spend some time in the hospital which will cost you more than paying someone to do it.get more than one bid.
2007-03-02 07:29:37 · answer #1 · answered by Steve C 5 · 0⤊ 0⤋
It would be best to cut the large branches first. Then cut it down in sections. Use ropes to hold the branches so you can control the fall, and get some help. It sounds like you want someone who has done it before. It is very dangerous to do without proper knowledge. You don't say where the trees are in relation to the house, etc. but the major concern will be... WHERE WILL IT LAND? You MUST know this before it happens. Good luck. : )
2007-03-02 06:21:15 · answer #2 · answered by joopster8505 3 · 3⤊ 0⤋
Everybody has told you how to cut it down, but once cut down you still need to remove the stump. Go to you local hardware store/nursery and ask for Grant's Stump Remover. By following the directions you can remove the remainder of the tree.
2007-03-02 08:25:21 · answer #3 · answered by fidel410 5 · 0⤊ 0⤋
20 feet you will have to start cutting at the top but why dont you try and sell them to some one for poles and make them remove them write up a contract for the removel and the debre removal save your back
2007-03-03 00:32:26 · answer #4 · answered by mountainchowpurple 4 · 0⤊ 0⤋
need a good size chain saw, and a chipper.
2007-03-04 23:06:05 · answer #5 · answered by it's just me 2 · 0⤊ 0⤋
First you chop them down - - then you chop them up.
2007-03-02 06:16:32 · answer #6 · answered by Anonymous · 0⤊ 3⤋