My Epson C66 printer is recognized by my Mac. It even tries to print when I tell it to. It just prints blank pages though, and I JUST installed new cartriges. I dont have the manua either. Please help
2007-03-01 10:53:36 · 4 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Printers
The print head is clogged with dried up ink.
Take lint free cloth and Iso Propyl alcohol to clean it.
If not ok take it to a service center.
2007-03-01 22:12:50 · answer #1 · answered by Anonymous · 2⤊ 3⤋
I use epson printer's also.Had that problem once.It was the paper selection was set to wrong paper thickness.Have to watch that if your printing photo's and change to a page from the net,have to set paper type,in printer setting's.Also there is on mine a lever to adjust thickness for paper and envelope's.Mine's by the out let for paper. You can email epson or just get there down load's at www.epson.com while your there get the one that say's epson web to page .Give's you a tool bar for printing and preview of what your getting ready to print.Ifr you don't use your printer alot,ink head's clog some,run the head cleaner and test .May have to run a couple time's if it's badly clogged.Is your printer a all in one or just print?Some of the just print type are'nt that good anyway.Well hope this helped.www.epson.com just looked,the manual and new downloads are there,started reading the troubleshooter ,you need to do that when your thare.
2007-03-01 11:19:38 · answer #2 · answered by Larry-Oklahoma 7 · 3⤊ 1⤋
Firstly you check your dram. Remove the plastic paper. Then tried it cleaning then print. Other wish Your Canon ip2600 printer ink dram is some problems. You give some boil water ( 50 F-80 F) and put it some time. Then tried it cleaning then print. thanks
2016-03-19 21:57:22 · answer #3 · answered by Anonymous · 0⤊ 0⤋
what they said
2017-02-20 14:14:10 · answer #4 · answered by Angela 1 · 0⤊ 0⤋
Solution http://goo.gl/5SJ7v9
2015-03-26 20:57:59 · answer #5 · answered by ? 4 · 5⤊ 0⤋