what could be wrong????
2007-03-01 09:09:01 · 6 answers · asked by for me? 2 in Home & Garden ➔ Maintenance & Repairs
You should replace it with a rock softener, and fill it with rocks.
2007-03-01 09:36:47 · answer #1 · answered by Anonymous · 0⤊ 1⤋
If the water level is too high, the float valve is not working right. Usually, where the small brine tube goes into the softener, there is a larger tube that has a float valve in it, that can usually be removed by taking the cap off the tube and pulling the whole assembly out. Clean it up, make sure the float is moving freely and the valve is not plugged, and replace it.
Usually, there in not much more than a foot of water at the bottom of the tank, if the float is working right.
2007-03-01 10:01:54 · answer #2 · answered by roadlessgraveled 4 · 0⤊ 0⤋
Because that's where the water goes to be softened
2007-03-01 09:38:06 · answer #3 · answered by frozen 5 · 0⤊ 1⤋
It probably needs cleaning .Either, take the whole drawer out and give it a good scrub with a brush in the sink, they can get very scuzzy with soap and softener, or as i do, put in the dishwasher on the top shelf. it gets rid of the lot! That shoud do the trick no prob.
2007-03-01 12:09:31 · answer #4 · answered by Anonymous · 0⤊ 0⤋
If you are referring to water in the salt tank, your drain outlet is frozen or stopped up.
2007-03-01 12:19:30 · answer #5 · answered by clintea 4 · 0⤊ 0⤋
Um...nothing, put the lid back on and walk away.
2007-03-01 09:36:14 · answer #6 · answered by Jeffrey S 6 · 0⤊ 1⤋