2007-02-28 15:09:41 · 21 answers · asked by Destany J 2 in Science & Mathematics ➔ Physics
water vapor.
2007-02-28 15:14:34 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Steam
2007-02-28 23:13:14 · answer #2 · answered by TTU 2 · 0⤊ 0⤋
When water is boiled, it goes through what's called a phase change. The water phase changes from a liquid to a gas- steam. And when cooled, water phase changes to a solid- ice.
2007-02-28 23:14:46 · answer #3 · answered by jbean444 3 · 1⤊ 1⤋
Yup, its steam. And also any other gases that are dissolved in water. Are gases dissolved in water? Sure, CO2 in all sodas. Also Oxygen - ask any fish. Any chlorine put in by the city. Lots and lots of stuff, but mostly just steam.
2007-03-01 00:08:49 · answer #4 · answered by ZORCH 6 · 0⤊ 0⤋
It's water in a gas form. Water = hydrogen and oxygen
2007-02-28 23:23:03 · answer #5 · answered by •LIGHTS• 4 · 0⤊ 0⤋
In evaluation of severe-accident sequences for water-cooled nuclear reactors, molten core materials may be postulated to be released into the containment and accumulate on concrete.^The heatup and decomposition of concrete is accompanied by the release of water vapor and carbon dioxide gases.^Gases flowing through the melt upper surface can influence the rates of heat transfer to water overlying the melt.^In particular, the gas flow through the interface can be envisioned to enhance the heat removal from the melt.^A mechanistic model (CORQUENCH) has been developed to describe film-boiling heat transfer between a molten pool and an overlying coolant layer in the presence of sparging gas.^The model favorably predicts the lead-Feron 11 data of Greene and Greene et al. for which the calculations indicate that area enhancement in the conduction heat transfer across the film is the predominant mechanism leading to augmentation in the heat flux as the gas velocity increases.^Predictions for oxidic corium indicate a rapid increase in film-boiling heat flux as the gas velocity rises.^The predominant mode of heat transfer for this case is radiation, and the increase in heat flux with gas velocity is primarily a result of interfacial area enhancement of the radiation component of the overall heat transfer coefficient.^The CORQUENCH model has been incorporated into the MELTSPREAD-1 computer code{sup 6} for the analysis of transient spreading in containments.
2007-02-28 23:19:37 · answer #6 · answered by Anonymous · 0⤊ 1⤋
It is not a gas. It is steam which is another form of water.
2007-02-28 23:12:51 · answer #7 · answered by Anonymous · 0⤊ 0⤋
Steam.
The Syko Ward
2007-02-28 23:12:44 · answer #8 · answered by The Syko Ward 5 · 0⤊ 0⤋
steam in the form of water vapour, which as im sure you know is symbolised by H2O when heated it turns to a vapour, when it cools or condenses it becomes liquid again, though less in volume because of vaporisation.
2007-02-28 23:15:24 · answer #9 · answered by a1ways_de1_lorri_2004 4 · 0⤊ 0⤋
the gas is still water, it's just H2O in gas form. it's called steam
2007-02-28 23:13:14 · answer #10 · answered by Maka 2 · 0⤊ 0⤋
Saturated Steam (or water vapour)
2007-03-01 07:43:04 · answer #11 · answered by Norrie 7 · 0⤊ 0⤋