2007-02-28 13:57:56 · 7 answers · asked by luby 1 in Computers & Internet ➔ Hardware ➔ Printers
go to file, page setup and hit landscape.
2007-02-28 14:00:33 · answer #1 · answered by RattyTat 2 · 1⤊ 0⤋
When you go to print there is a print option to let you change it from portrait (vertical) to landscape (horizontal). Select that option just before you go to print. If you are using Word you can go into File>Page Setup and do it from there if you want to keep the soft copy as a landscape. With Word, you can do this at any time.
2007-02-28 14:03:27 · answer #2 · answered by aftekkie 2 · 0⤊ 0⤋
Go to "File" on the header, you may have to use the drop down arrows to find "Page set up" After you find page set up, Click on "landscape" (Think of a picture of a landscape, they are almost always horizontal) and taht will change the setting. Go back and click on Portrait to get back to a normal setting. Good luck!
2007-02-28 14:04:02 · answer #3 · answered by tlcats 3 · 0⤊ 0⤋
Switch the document from portrait to landscape.
2007-02-28 14:00:51 · answer #4 · answered by Anonymous · 1⤊ 0⤋
before you print it...go to file in menu bar..then click page setup in there you'll see in the margin's tab you can see the orientation you could choose from portrait or landscape.. then click landscape...
2007-02-28 14:03:38 · answer #5 · answered by daryl016 2 · 0⤊ 0⤋
choose landscape in page setup
2007-02-28 14:01:34 · answer #6 · answered by pas 3 · 0⤊ 0⤋
go to page setup under FILE, then select landscape.
2007-02-28 14:01:19 · answer #7 · answered by WitchTwo 6 · 1⤊ 0⤋