I have put a stain and satin varnish on my doors and skirtings in my house and i would now like to gloss them Do i have to sand the varnish off or is there another method or substitute i can use?
2007-02-28 06:27:10 · 6 answers · asked by Anonymous in Arts & Humanities ➔ Books & Authors
just give it an undercoat,or matt paint,then gloss
2007-02-28 06:34:07 · answer #1 · answered by ? 4 · 0⤊ 0⤋
You need to sand them well though not necessarily back to bare wood and then treat with a good quality undercoat and gloss. They should cover ok.
2007-02-28 07:15:31 · answer #2 · answered by gerrifriend 6 · 0⤊ 0⤋
A light sand, then brush a coat of pva glue thinned with water.
allow to dry, then paint. works every time.
2007-02-28 07:05:25 · answer #3 · answered by Edd e 7 · 0⤊ 0⤋
hi you will have to heavy sand then under coat and gloss and this should be just fine hope this helps
2007-02-28 06:35:18 · answer #4 · answered by Anonymous · 0⤊ 0⤋
We sanded ours thoroughly, then primed them before glossing.
2007-02-28 06:37:26 · answer #5 · answered by Take me to Venice 3 · 0⤊ 0⤋
Yoda would say: sand them you must.
2007-02-28 06:35:11 · answer #6 · answered by sofista 6 · 0⤊ 0⤋