2007-02-27 12:57:57 · 5 answers · asked by whatsepultra 2 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
what if i change the housing
2007-02-27 13:04:24 · update #1
I own a transmission shop, and can give you this information. The transmission out of the 2.2 is a Borg-Warner T-5. The V-6 engines all used the New Venture Gear 3500 transmission. As anyone may know, one could shoe horn anything into about anything, and with an adapter plate, "make it work". The problem is not so much will it work, but is it economically reasonable to do? I don't think the bell housing off the 2.2 will bolt to the 4.3, and would require an adapter plate. By moving the location of the clutch release assembly, this would cause many problems, and would require some fabrication skills. The best advice I could offer you, is to forget the transmission out of the 2.2, and find a good one out of a 4.3 to go in it.
Glad to help out, Good Luck!!!
2007-02-28 00:31:59 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Most Likely not.
Take the #'s off the S10 and the Engine Blobk and Trans block go to a Chevy Dealer and find out. You can ask for a blue print how the placement needs to befor the Drive Shaft.
Sounds like the Belhousing will not line up to the engine and also may not line up properly with the Trans mounts.
2007-02-27 22:51:14 · answer #2 · answered by stickneypoint 2 · 0⤊ 1⤋
No it will not fix as the bolt patterns are different , and even if it would the one form the 2.2 would not that the torque of the 4.3
2007-02-27 21:15:13 · answer #3 · answered by Rudedude 4 · 0⤊ 1⤋
the bolts on the bell housing are different...completely different drive train...
2007-02-27 21:14:58 · answer #4 · answered by rassmussen2000 1 · 0⤊ 1⤋
i think you meant to say a 4.3,but no it wont the bolt pattern is totally different in them, good luck i hope this help,s.
2007-02-27 21:03:00 · answer #5 · answered by dodge man 7 · 0⤊ 2⤋