does anyone know how to remove and install a 1960 impala driveshaft bearing support.?

Question

my impala is a 4 dr and it has a 2 piece driveshaft but there's no way i can get to the bearing because where the driveshaft is at is all sealed up. i dont know if the manufactorer made like it or if the owner did it. it's a solid plate that's welded on the bottom. should i cut around it or what. i can get to the bolts to loosen the bearing,but not the bearing itself. thank you. eric 626-890-9412 cellphone.

Answer 1

Remove both drive shafts and the center bearing support. Take the unit to a driveline repair shop and have them press the support off and a new on e on.