netgear wireless router?

Question

hi, i have just bought a netgear wireless router and usb adapter. the problem i am having is my pc works on the internet but the other pc says it is connected to the net but wont display a webpage or go on to the internet at all! is there anything i can do to fix this problem?

Answer 1

Hi, I have a netgear router too. Netgear router deault address is 192.168.0.1

On your main pc open up internet explorer and type in te above address. Enter your user name and password. This is the netgear password which i think default is admin for user and password for password. Look at your wireless settings and see that you have entered and SSID. Just look further down the page and disable your security options. Click apply. Check you can now access web pages on the other pc. If you can't then you need to set up the other pc in your wireless access list on the router. Click on set up access list and add your second pc by its mac address. Make sure it appears in the trusted wireless stations. Make sure turn access control is on at the top of the page. Hope this works. If it does then you will need to turn your security back on

Answer 2

Encryption will stop you connecting, so it's Not WEP or WPA.
Make sure your Network card properties are set on TCP/IP to obtain an IP address automaticly.
Best way to find out is to get a
Click on START, RUN, type CMD and click on OK.
You get a DOS prompt and type IPCONFIG /ALL and press Enter.
Near to DHCP it should say YES.
Your DNS IP address should be the same as your DEFAULT GATEWAY address. To see if it is a DNS problem, type in the DOS prompt "Ping 69.147.114.210" and press Enter. Don't type the Quote marks.
If you get a reply, it's a DNS problem, if you don't Your IP address is not via DHCP probably
Email me if you need more help.
Good luck

Answer 3

You need to get the WEP from the code that is on the wireless router.

It should say WEP or WPA.

When you enter the WEP for connecting to that wireless router, you should able to get a webpages.