Also, how would you change the idle speed if needed?
2007-02-26 02:37:29 · 3 answers · asked by CDTX83 1 in Cars & Transportation ➔ Maintenance & Repairs
Well, here is what the manual says;
"Idle mixture is controlled by the Powertrain Control Module (PCM). Adjustment is not possible. Slight fluctations in idle speed are considered normal. Start and run engine for at least 7 minutes to establish PCM control of idle."
"Incorrect idle speeds are normally caused by dirty throttle plate or vacuum leaks."
2007-02-26 08:49:12 · answer #1 · answered by Naughtums 7 · 0⤊ 0⤋
Idle speed is computer controlled. It will adjust the idle based on things like the A?C being on or off. The Power Steering being used or not. The engine temp. etc etc. On average the idle will be about 650 rpm at idle, enginge hot all acc's off. There is no way to adjust the idle. There is a throttle plate stop screw. But this is NOT the idle adjusting screw. If the idle seems too high or low. Have it checked out by a trained technician.
2007-02-26 02:47:51 · answer #2 · answered by akicestorm 2 · 0⤊ 1⤋
ought to definitely be a carbon difficulty sticking/leak inflicting the EGR valve to malfunction. Sticking/leaking EGR valves will make a inventory engine idle uneven as though it had a great cam in it. in spite of the undeniable fact that, i might assume which you would be getting a provider Engine mild.
2016-11-26 00:08:59 · answer #3 · answered by ? 4 · 0⤊ 0⤋