2007-02-25 23:51:20 · 6 answers · asked by Baba 2 in Computers & Internet ➔ Hardware ➔ Laptops & Notebooks
you have to chech first the switch or the other terminal computer speed is it 10 or 100 your computer will follow it
2nd try to change the cable you are using it might be bad or cut somewhere
3rd check the card driver go to device manager and choose the card driver and go to advanced you will find link speed
there is some choices auto negotiation 100full duplex and 10 full duplex
you can force your computer to be 100 all the time if you are sure that the other terminal is 100 as if the other is not 100
and you forced yours it will not connect
2007-02-26 00:58:51 · answer #1 · answered by adel_gaber 1 · 0⤊ 0⤋
First verify that the device you are connecting to is capable of operating at 100 Mbps, second check your device settings to make sure you are not limited to 10 Mbps, third verify that you are using a Cat5 cable or better. Aside from that it could be a defective NIC or network device (router, switch, hub).
2007-02-25 23:56:35 · answer #2 · answered by Mortis 4 · 0⤊ 0⤋
1. Check the cables
2. Check the status LED light on the network card
3. Check the drivers in the device manager, should'nt be a question mark in device manager
4. Reboot.
2007-02-26 00:25:35 · answer #3 · answered by ? 3 · 0⤊ 0⤋
It depends on the cable you are using, the Hub/Switch/Router and the connection the other end! The chain is only as strong as the weakest link!
2007-02-25 23:54:46 · answer #4 · answered by Christian K 2 · 0⤊ 0⤋
Is your computer corrupted with blunders? RegistryWizard's loose test will at once discover registry issues and privdes an entire registry record detailing risky gadget conflicts and blunders.
2016-11-25 23:58:02 · answer #5 · answered by Anonymous · 0⤊ 0⤋
my friend eats food, what do i do?
2007-02-26 00:01:38 · answer #6 · answered by Anonymous · 0⤊ 0⤋