need to see a diagram of how carburetors are joined and installed
2007-02-25 04:06:53 · 2 answers · asked by John W 1 in Cars & Transportation ➔ Motorcycles
Try this; http://www.yamaha-motor.com/sport/parts/home.aspx
Use the drop downs to pick the correct vehicle. Then select "Carburetor" from the list on the left of that page.
If you have any problems send me an email and I'll be glad to help if I can.
2007-02-25 05:47:20 · answer #1 · answered by Nomad 4 · 0⤊ 0⤋
To remove/install them is pretty straight forward. No special tools or complex procedures.
To remove -
--Remove fuel tank.
--Remove air cleaner cover (right side).
--Remove hose clamp behind air box, unbolt and remove air box.
--Remove chrome cover on left side.
--Unplug all wires going to carbs.
--Loosen both hose clamps on each manifold (air box side).
--Slide the clamps towards the center of the manifolds.
--Pull the manifolds off (mark them with a magic marker F & R cylinder and an arrow pointing to the carb).
--Loosen the hose clamps on the intake manifolds.
--Pry the carbs up to remove from the manifolds.
--Slide the carbs off of the bike sideways.
--To help with installation, spray the inside and outsides of all manifolds with WD-40.
--This last bit of advise is for everyone. Anyone attempting to work on their own bikes, should own a shop manual. You've invested so much time and money on your precious machine. Why trust answers you get from strangers on message boards. Would you rather spend $40 for the correct information, or take a chance and end up making a $500 mistake?
http://www.motocom.com/motorcycles/
2007-02-25 14:28:38 · answer #2 · answered by guardrailjim 7 · 0⤊ 0⤋