Thanks for all the help today, I'm just not quite following how to do this. Also, my belt came off and I cannot find a diagram. Does anyone know where there would be one online that would tell me how to belt it properly? Thank you.
2007-02-25 02:16:07 · 6 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
BIG wrench on the nut of the tensioner, BIG big wrench!
As for the diagram, year make and model would help.
2007-02-25 03:53:14 · answer #1 · answered by netthiefx 5 · 0⤊ 0⤋
Depending on the vehicle, there is either a square (usually 3/8 or 1/2) hole for a ratchet or a recess for a wrench on the tensioner arm. Swing the arm to the direction loosening the belt.
2007-02-25 02:24:14 · answer #2 · answered by Anonymous · 2⤊ 0⤋
I take for granted, You have some tools.
in the center of belt tension-er is a hexagonal head bolt,put a socket (right size) on it and move it to loose the tension on the belt. while You hold it (one hand) install the belt (the other hand)
careful,the bolt tight in counter clockwise
2007-02-25 03:11:36 · answer #3 · answered by Anonymous · 0⤊ 0⤋
If it is a ford stick the proper socket on the bolt for the tensioner pulley and push down untill you can put the new belt on.
2007-02-25 02:57:14 · answer #4 · answered by towbusiness 3 · 0⤊ 0⤋
try alldata.com for a small charge you can get the info your looking for to get your car back together proprely
2007-02-25 02:42:16 · answer #5 · answered by jbhunter 2 · 0⤊ 0⤋
you turn it to the right to loosen it and to the left to tighten.righty loosen,lefty.tighty.
2007-02-25 02:20:36 · answer #6 · answered by Anonymous · 0⤊ 0⤋