how do you retore computer back to factory setting?

Answer 1

That would depend on the Computer.

For Dell Computers,

When the Dell screen appears, press and hold the key on the keyboard, press the key, then release them both at the same time.The Dell PC Restore by Symantec window appears.Click the Restore button or press the key to highlight Restore and press the key.
A caution message appears, advising that all data will be lost.


or you can use Windows XP restore:

Start/all programs/accessories/system tools/system restore.

If you have a HP, install your system restore cd and restart your computer. That will bring up system restore.

or you can use Windows XP restore.

Answer 2

I actually had to do this 2 weeks ago. I reinstalled my operating system so that there was nothing there. It was like I just bought it and took it out of the box. There are some things you need to take into consideration though:

1. Do you need anything that is on your computer. You really should back up everything so you can have it again when you're done.

2. How old is your computer? Mine is 4 years old and it was a big pain to get updates to all of my drivers. I also ended up having 77 microsoft automatic updates that needed to be installed.

3. Do you have the OS disks that came with your system.

I have a gateway. I used the disks they provided. I did end up having to use their internet support to help me install the sound card drivers again. I also had to hardwire the internet so I could get the wireless card reinstalled so it would pick up my wireless router. After a total of 3 days my pc is good as new and running perfect.

Just make sure you realllllly want to do this. If you just want to go back to factory settings for the pc and not reinstall everything I would suggest your owners manual or PC help system.

Answer 3

Sharon, you will need to read through your branded PC's user guide/manual. It will state your steps and procedures clearly. Notes that the steps to begin restoring your computer back to factory settings, are vary from each manufacuter.

If your PC comes with manufacturer CD or DVD for system recovery, it is easier. Follow the manual's instruction to start your PC (boot) from the CD/DVD and complete your choice on the screen.

If it only comes with a hidden partition storing the recovery files and application on your PC's harddrive, that will be several steps to begin.

E.g. Acer: press both [Fn] & [F10] key once you start your PC, the system will launch Acer eRecovery software to help you completing your task. If not, you can launch it later as you gain access to Windows.

Please backup all your personal files and prepare any setup package of the software you use for your daily tasks prior to the factory recovery process. The process will destroy all the files on the harddrive, except there are information telling you which aspects are not affected.

Please backup the factory recovery copy too, if not Factory Recovery Disc is available to you. There will be on-screen note or statements in your PC's manual informs you about this, ensure PC system safety.

Factory setting will not be available on PC without operating system preloaded.

Hopes these information helps you.


BEST REGARDS,
Jack

Answer 4

That is very simple, but first you have to remove the case. Look at your manual to find out to open the case. Once, opened you will hopefully see a coin sized battery. This is called the CMOS battery, that continues to gives power to the CMOS or the BIOs setting that you set. Remove the battery, but be careful when trying to take it out because the battery will be needed later and you don't want to damage your motherboard. Before you do remove the battery, make sure that your computer case is put on a non-static surface like wood or rubber. Once you do, make sure you touch the case to prevent any static electricity. Static electricity can damage important circuits to your motherboard so be careful! The motherboards are built much better, but does not mean it will not happen. If you don't see a battery, flash (getting rid of CMOS) the cmos jumper and to find the jumper I suggest taht you look at the manual to find the right one. If you don't have a manual, locate the wire that has CMOS on its plugin. Once you remove the battery or flash the CMOS jumper, unplug the power supply. Let it sit there for at least fifteen minutes to an half hour. Once this time has past, start up your computer and set up the BIOS way you want it to be.

Answer 5

You should have received restoration disks with your computer. Put one in the drive and reboot, it should boot to that CD and start the recovery process to set it back to the way it was when you first received it.

Answer 6

Use the restore disk to format and reinstall the OS.

Answer 7

go to restore, back the date up

Answer 8

Use your warranty card..