I have a lexmark Z603 inkjet printer. the problem is that the printer prints a blank sheet though the catridges are filled and installed properly. Also the port is ok.
can any techie help me out?
2007-02-22 15:39:39 · 9 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Printers
although my cartridges were filled the black would not print so I submersed the black in warm water and it worked-------Temporarily
2007-02-22 16:00:11 · answer #1 · answered by Bob d 1 · 0⤊ 0⤋
Hopefully if it's a nice new printer you should have got an A3 sheet with it showing you the steps to take to install it, install the printer cartridges and how to connect it to your computer. I bought a Lexmark from Tesco's about a year ago. It looked new, but was obviously a return when I got it home and opened it, just to find the printer in it and nothing else!
2016-05-24 01:06:33 · answer #2 · answered by Anonymous · 0⤊ 0⤋
It's been a while since I've heard of any problem like that. What I would do is go into your Control Panel, remove the printer from your system under the "Printers" menu, and then go to lexmark.com and download new drivers. Then, install the new drivers. That should fix things.
2007-02-22 15:46:16 · answer #3 · answered by Anonymous · 0⤊ 0⤋
How old is it? I had a Lexmark printer for 3 months and it did the exact same thing. Buy Epson or HP when it comes to printers, I think.
2007-02-22 15:43:03 · answer #4 · answered by tooqerq 6 · 0⤊ 0⤋
Similar thing happened with my Epson printer. Unless your printer is under warranty, consider purchasing a new printer. The cost to repair will easily surpass that of a new printer. Unfortunate the cost of labor versus a new device.
2007-02-22 15:43:40 · answer #5 · answered by Jim Maryland 7 · 0⤊ 0⤋
i have had several lexmark printers
i know they are cheap but i have had relttivly few problems
i have a lexmark printer thats well over yrs old and its still working
i dont know about your problem but why not try to call lexmark
2007-02-22 15:51:14 · answer #6 · answered by grumpy0282 3 · 0⤊ 0⤋
It is possible that the printer's fuser is damaged.
get it serviced.
2007-02-22 15:52:52 · answer #7 · answered by delnaz k 2 · 0⤊ 0⤋
throw it away. I had 2 and both did the same thing. They are a waste of money.
2007-02-22 15:46:19 · answer #8 · answered by Puffins 4 · 0⤊ 0⤋
try unplugging all the wiring then reconnect. you could just have loose wires. at least i would start with this and if that doesn't work then try something else.
2007-02-22 15:46:09 · answer #9 · answered by lindar 2 · 0⤊ 0⤋