2007-02-21 19:37:45 · 9 answers · asked by young p 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
The quick answer, yes they make superchargers.
I'd recommend reading some message boards as to which brand is best. Many people have tried all the available mods, and are not shy with their feedback on them.
The main LS1 players in the supercharger market are Vortec, Powerdyne (I think they're still around), and Pro Charger. Pro Charger is gaining in popularity due to its dual intercooler setup. Powerdyne is a belt driven system, but has been reported to fail more often. Vortec is the more expensive of the bunch, but is the veteran of the bunch. My '94 has a Vortec supercharger on it, and it works great. Cost is about $7K though, so make sure you have some cash!
2007-02-26 03:31:15 · answer #1 · answered by JC 3 · 0⤊ 0⤋
you have quite some goodies yet are forgetting a number of key factors mandatory to get you into the ten's. decrease the gearing interior the differential. Detroit locker differential 4 link rear suspension. Aftermarket cylinder heads Aftermarket camshaft solid aftermarket pistons. be confident to get blower friendly pistons. those will frequently be interior the 8.0 to eight.5 compression ratio variety. A blower with bigger compression pistons you have quite some issues of detonation and the engine won't stay long. workstation programmer or aftermarket workstation. The manufacturing facility workstation limits RPM to approximately 6200 RPM and suited velocity to approximately a hundred and fifty five MPH. you does no longer want the manufacturing facility workstation velocity limiter or RPM limiter shutting you down. you will additionally would desire to alter ignition timing and gasoline delivery to make amends to your engine variations. in case you have an computerized transmission it is going to would desire to get replaced or upgraded. you would be making way too plenty potential and torque for the inventory transmission. whether you have a handbook transmission it is somewhat helpful to evaluate an improve to cut back the possibility of transmission failure. bigger gasoline injectors. A blown engine will run lean on the inventory injectors. You possibility burning valves or pistons. Roll cage. a 10 2d motor vehicle does no longer belong on the line. verify at the same time with your interior of reach drag strip for a duplicate of their rule e book in the previous you start up. Fiberglass doorways, hood, hatch, and fenders to shed weight gut the interior of all pointless products. a number of the enhancements you're making plans are eye candy basically and could no longer get you into the ten's The paint won't make you pass any swifter Sway bar won't make you pass any swifter
2017-01-03 07:35:08 · answer #2 · answered by ? 3 · 0⤊ 0⤋
yes they do if you have a true 2000 camaro having the LS1. try going to vortex superchargers or the one that I used was at this site.http://www.fawcettperformance.com/product_info.php?products_id=127 hope this helps ya out.
2007-02-21 19:51:06 · answer #3 · answered by Anonymous · 1⤊ 0⤋
Kenne Bell
2007-02-22 06:00:52 · answer #4 · answered by Johnny 4 · 0⤊ 0⤋
Yes, a bunch of aftermarket people make them. If you are looking for a factory charger, no luck. So good luck.
2007-02-22 07:09:23 · answer #5 · answered by Deano 7 · 0⤊ 0⤋
go to Paxton on web. get a catalog from Jegs or Summit racing...
2007-02-22 00:57:15 · answer #6 · answered by Anonymous · 0⤊ 0⤋
Procharger makes one. You can check it out at procharger.com.
2007-02-21 20:08:50 · answer #7 · answered by r1rider 1 · 0⤊ 0⤋
do you have a 3800? if so go to:
SLP Performance
ZZ performance
or go to F body performance!
2007-02-22 10:42:25 · answer #8 · answered by The King 6 · 0⤊ 0⤋
yes, look up THEY.com
2007-02-21 19:41:40 · answer #9 · answered by Anonymous · 0⤊ 0⤋