how much fabric should i use to make table runners?

Question

making the table runners for my wedding, the tables are round 5 foot tables. how many yards of fabric should i use on each one?

Answer 1

It depends on how long you want the runners--do you want them just the length of the table, or hanging over on the ends--and how wide you want the runners to be.

I'm assuming the tables are 5 feet in diameter. Add that length to the overhang you want on each side, add 1/2" on each end for seam, and then double it--unless you want the runners to be single ply.

The amount of yardage would depend on the final measurement (the width of the runner plus 1/2" seams).

Answer 2

Most fabric is 42-44" wide, but you may be able to find something you like in the drapery/upholstery fabric department that is 60" wide. Each table runner then would be that long, and the width you chose. I used 3/8 of a yard for one table runner and hemmed the edges by machine.

Answer 3

The table runner will work as long as it hangs to the seat of the chair but not resting on it...Runners should be long enough to almost reach the chairs or it should be just the length of the table and not hang down past the edge. You can shorten one easily or sew one together...it can be as plain or as fancy as you wish and any length you want for your look...you choose. Another look you can do is to make two shorter runners (depending on your table size) and run them the width of the table instead of the length putting the place settings on the runners..this look would only be used at dinners, not for everyday and only on table that seat at least two along the sides.

Answer 4

extremely tough task. do a search over a search engine. that may help!