why pilot say 'roger '?

Answer 1

ROGER -- "in the meaning of 'Yes, O.K., I understand you -- is voice code for the letter R. It is part of the 'Able, Baker, Charlie' code known and used by all radiophone operators in the services in the 40's - 50's.

From the earliest days of wireless communication, the Morse code letter R (dit-dah-dit) has been used to indicate 'O.K. -- understood.' So 'Roger' was the logical voice-phone equivalent." Also from “I Hear America Talking” by Stuart Berg Flexner (Von Nostrand Reinhold Co., New York, 1976).“Roger! A code word used by pilots to mean ‘your message received and understood’ in response to radio communications; later it came into general use to mean ‘all right, OK.’ Roger was the radio communications morse code word for the letter R, which in this case represented the word ‘received.’ ‘Roger Wilco’ was the reply to ‘Roger’ from the original transmitter of the radio message, meaning ‘I have received your message that you have received my message and am signing off.” Wilco implies "I will comply"

Then of course there is the "Roger Beep" (Di-Dah-Dit) which legend has it was innovated by the Space Missions as a quick way to "Roger it" No source for this "but have it on good authority - by a guy who was there" hi hi. From the DX Reflector Ok, I have heard and seen a half dozen explanations, now here is one from one who has "Been there- Done That". "Roger" in both military and government communications definitely came out of the old cw days (and yes I did send/receive cw messages at the beginning of my career). The "R" was sent as a confirmation of receipt of a message,or a portion of a message. "R" was used, not "QSL". In voice communications , it thus became "Roger".

Even in front-line operations such as by forward observers (I did that too). We used Roger and Negative You had to be completely confident in what you were sending or receiving after all, it could , and often was, life or death as to what got thru the communications lines. I cringe almost every time I hear any military movie communications. WILCO means: I will comply with your orders. OVER means I have finished my transmissions and turn the channel over to you to transmit. CLEAR means I am finished with this communication and am standing by on the channel. OUT means I have completed transmission and am completely finished and closing this station or switching to another channel. So you can see why I cringe with "Roger Wilco Over, Clear and Out" WHAT DID HE SAY????

Navy Pilots say the use of Roger Wilco is frowned on, use one or the other as applicable.

Answer 2

Most probably the word was chosen because it is easily distinguished from other words that might have other meanings.

What "Roger" means when used by pilots is "I have received and understand your message." It doesn't mean he will do what the other person said he should do. If a pilot wants to confirm an instruction he should say "Wilco," which means "will comply."

Thus, "Roger, Wilco," means "I have received and understood your instruction and will comply with it."

Hope this helps.

Answer 3

"Roger" is terminology used over two way radios, to confirm that the person has received all of the necessary information. which is why they usually "roger that," then "over" to signal the end of the message.
I will run through an example of two-way radio protocol
Lillee to Ima, do you receive, over.
receiving Lillee, over.
can you please come to the 2nd floor now, over
roger that, over.

Answer 4

Because it sounds much better than "Francis".

Answer 5

i think say it wen he win

Answer 6

It means "I understand."

Answer 7

why is this under tennis?