automotive question.
2007-02-21 05:39:58 · 5 answers · asked by 93prelude 1 in Cars & Transportation ➔ Maintenance & Repairs
A Punch and hammer. LOL. punches come in different sizes, you can buy the size that is closest to but not larger in diameter to the roll pin...hammer the pin out with the punch. Sometimes the punches are referred to as needle punches or drift punches. The trick with the nail can work too sometimes but a nail can bend easily where a punch is harder and won't bend as easily.
2007-02-21 06:22:37 · answer #1 · answered by alk99 7 · 1⤊ 0⤋
DOOH!!!
Roll pin remover is good......But you can use a simple nail and cut the point off of it make sure the nail will fit the pin and not get stuck in the pin hole.
2007-02-21 05:49:20 · answer #2 · answered by Uncle Red 6 · 0⤊ 0⤋
A rollpin remover.
2007-02-21 05:47:56 · answer #3 · answered by Student 4 · 0⤊ 0⤋
you dont have to buy or rent 1.just take a sharp,pointed center punch and hammer.
2007-02-21 07:08:53 · answer #4 · answered by Anonymous · 0⤊ 0⤋
a pin punch!!!
2007-02-25 05:00:56 · answer #5 · answered by giff01 3 · 0⤊ 0⤋