1983 dodge van electric window switch broke ,can i install a toggle switch,old van parts are hard to find
2007-02-20 12:41:22 · 5 answers · asked by calvinius2 1 in Cars & Transportation ➔ Maintenance & Repairs
you remove the door panel and remove the wiring to the switch and use a jumper wire from current going in to switch and take the other end and hook it to the motor.....and if you don't know which wire...do them all...until the motor moves... then unplug it... but you can find old dodge parts...go to car-parts.com...this is nation wide..if that doesn't work..try vintage auto parts in texas...281-999-0191..
2007-02-20 13:02:45 · answer #1 · answered by gotspeed7883 3 · 0⤊ 0⤋
Yes. Go to your local library and see if you can get a wiring schematic. Then trace what wires do what and install your switch. You honestly can't find a used switch? Try www.carpart.com. Later!
2007-02-20 12:53:45 · answer #2 · answered by adtmatt 3 · 0⤊ 0⤋
Check to see if you have a window lock button. Some cars have them and some don't. If this button is pushed down, none of the windows will work.
2016-05-24 00:18:57 · answer #3 · answered by Anonymous · 0⤊ 0⤋
i own a shop,and just pull the wires loose from the plug connector and jump it over,it will take two wires to do this,but at least you will be able to get the window up on it,good luck i hope this helps.
2007-02-20 12:46:23 · answer #4 · answered by dodge man 7 · 0⤊ 0⤋
ditch the van dude!
2007-02-20 13:45:48 · answer #5 · answered by Anonymous · 0⤊ 0⤋