2007-02-20 11:16:19 · 7 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
Get those suction puller things. And use hammers, but be careful.
2007-02-20 11:18:19 · answer #1 · answered by Underlined name. 4 · 0⤊ 0⤋
Depending where the dents are you can use what is called a suction cup that pulls out cave in, but the more serious ones need to be drilled and a puller used.
2007-02-20 19:19:02 · answer #2 · answered by Anonymous · 0⤊ 0⤋
If they are not "Crease" dents try a sink plunger. If it has creases along the edges you have to drill small holes in it and use a screw puller device with a sliding weight to pull it out then grind it down and fill smooth with bondo. Then sand very smooth primer, paint . Good luck!
2007-02-20 19:20:37 · answer #3 · answered by Fireman T 6 · 0⤊ 0⤋
The same way to remove dents from a car..
http://www.dentwizard.com
If you're a handyman maybe you can do it yourself by tooling it up, then primer, then paint area. It all depends how neat you want to be.
This is a pretty clear cut question with a clear cut answer.
.
2007-02-20 19:19:48 · answer #4 · answered by rob1963man 5 · 0⤊ 0⤋
go to a body shop..or buy those dent popper outers thats on tv
2007-02-20 19:19:29 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Bang them out with a rubber mallet.
2007-02-20 19:18:30 · answer #6 · answered by The Reverend AG 2 · 0⤊ 0⤋
Take it to the body shop
2007-02-20 19:18:53 · answer #7 · answered by Anonymous · 0⤊ 0⤋