What is the best way to convert my vinyl record collection to mp3 etc. so that I can listen yo them on my mp3?

Question

I currently have a creative zen vision:m

Answer 1

You can get turntables that connect via usb ports to your computer. This comes with conversion software to make mp3 files.
I have never heard one though, so do not know about the quality.

Answer 2

get your old record player out and then get an adapter that will go from rca "red and white" connector at the back of your turntable. to 1/8 of an inch stereo plug ..now take that plug and put in the hole in your computer for your microphone.then use your windows recorder and set it to "record what you hear" and then save the file once it's recorded.The next step is easy just get some software that converts wave to mp3 and there you have it your old Lp's on cd in mp3 format.. You may have to play with the recording volume a bit till you get to a sound level you are happy with..best thing is to turn mic boost off.

Answer 3

Do you have an amplifier with a phono stage? You CAN'T use a microphone input on a PC card to amplify the tiny signal from a record player properly, because the output from a record player does not have a flat frequency response. What you need is a phono stage, which not only amplifies that tiny signal, but equalises it to produce a flat frequency response.

If your existing stereo/home-cinema amplifier doesn't have a phono stage, Maplin in the UK sell them for £25, though the quality's pretty basic:

http://www.maplin.co.uk/Module.aspx?ModuleNo=28732&criteria=phono&doy=24m2

If your amp does have a phono stage, plug your turntable signal cable into it. Then connect the Tape Out sockets of your amp to the line input of your PC sound card (you'll need a cable with a pair of RCA connectors at one end - the standard hi-fi connectors - and a single stereo 3.5mm mini-jack at the other end). Maplin sell these too:

http://www.maplin.co.uk/Module.aspx?TabID=1&ModuleNo=31700&doy=24m2

Then, set your stereo/home-cinema amp Input and Record Out switches to Phono, lower the needle into the groove, and start recording on your PC!

If your amp doesn't have a phono stage (and most won't, as turntables aren't widely used these days), use the RCA/3.5mm cable mentioned above to plug the output of the phono stage directly into the line input on your sound card.

Answer 4

the toughest to detect checklist in my series (trimmed all the way down to approximately 500 over the years) replaced into Leo Kottke's 1969 debut: 12 String Blues, stay on the coed Coffeehouse. there replaced into approximately 1200 pressed and disbursed out of Minneapolis in 'sixty 9. After a 12 months of looking, I won a replica on ebay public sale in VG++ situation for $eighty one, it incredibly is the main I even have ever paid for a checklist; besides the undeniable fact that it replaced into worth two times that. various months later, I pulled some strings at a stay overall performance and have been given it autographed! He replaced into *very* stunned to confirm it. i'm specific somebody accessible might supply me $500 for it, no longer that i might ever sell it. i attempt to get a vinyl jacket signed at each and every coach obtainable, I now have 17. BA: musically? impossible.. BA2: on the 2nd, Stephen Stills-Manassas. That one by no potential remains off the turntable too long. edit: I also have a digital conversion turntable it incredibly is extraordinary; yet whilst i'm relaxing in the night, i visit spin a checklist despite if this is already on the pc. digital music is thoroughly soulless.

Answer 5

Set up your Amp and Record deck next to your computer. Connect the output of your amp to the line in of your computer using a 3.5mm stereo jack to phono cable (use gold plated connectors if possible). You will have to do this, as the signal coming from your record deck is too small to be properly recognized by your computer, and so has to be amplified by your amp before it goes to your computer. Use software such as polar bit sound recorder to record what is going in to our computer, and remember to set the sample rate as high as possible to get the best possible recording. Before you start recording, clean the record it's self and make sure the needle is in good condition. Hope this helps.

Answer 6

Right the first thing you have to do is get all those priceless records and warm them under the grill.Once molten pour into your MP3 player, try not to spill as you may find the songs may jump when you play them back.Hope I have been of help.