2007-02-20 02:55:43 · 4 answers · asked by Mark B 1 in Cars & Transportation ➔ Maintenance & Repairs
Without proper diagnostics it could be anything from a bad fan to a burnt wire to a blown fuse and all of which could stop your cooling fans.
Take it to a repair shop that you trust and they will have the proper equipment to do the repair. Home repairs might work for a short time but most always cause more problems than they're worth.
2007-02-20 03:18:33 · answer #1 · answered by num1huckfinn 5 · 0⤊ 0⤋
You could do as I did for my fan problems. I first check to see if the fan motor was not the problem by running a hot wire to the fan. The fan came on when I connected a hot wire from the battery to the fan, this told me the fan motor was good. I then ran a hot wire and a ground wire to a switch witch i mounted on the dash board. When I came to a stop due to traffic or a red light I hit the switch and all is well. But you may not want to put up with this, so I suggest that you either replace your temperature sending unit, fuse, cooling fan relay, or it may be your fan is toast.
2007-02-20 11:12:39 · answer #2 · answered by Robert D 2 · 0⤊ 0⤋
The thermostat controls the engines coolant temp,Your best bet is to change the temperature sending unit,a small probe that screws into the water jacket of the engine block.
2007-02-20 11:01:43 · answer #3 · answered by thehardway72 1 · 2⤊ 0⤋
check for malfunction coolant fan relay,burn fuse,coolant sensor. all this require tools to test it
2007-02-20 11:02:19 · answer #4 · answered by LEXUSRY 5 · 2⤊ 0⤋