English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I lost my manual and can't seem to find it online...I tried holding down the odometer button and I get it to the point that it's blinking but it won't reset..any help would be appreciated!

2007-02-19 15:53:43 · 8 answers · asked by TwinkleHead 2 in Cars & Transportation Car Makes Honda

I tried the suggestion of shopteach...didn't work...any other suggestions...?

2007-02-19 17:49:11 · update #1

8 answers

ok heres what u do...take and with the car running use your trip reset button to get it to show your oil life...then mash and hold it till it starts blinking like u have done but then let off and mash and hold it again...it will then reset to 100%

2007-02-20 03:43:32 · answer #1 · answered by Steven S 3 · 3 0

Honda Accord 06

2016-12-12 03:45:37 · answer #2 · answered by veloso 4 · 0 0

1) Turn they key to the II position
2) Turn the key to the off position, and push and hold in the odometer reset button
3) Turn they key back to the II position, while still holding the button.
4) After about 10-15 seconds, the light should go off.

2007-02-19 16:02:33 · answer #3 · answered by shopteacher 4 · 0 0

06 Honda Accord

2016-11-01 11:46:39 · answer #4 · answered by ? 4 · 0 0

on the select or reset button the one on the left hold it down for about 10 to 15 seconds . that will do it when you get to the % of oil life screen .then hold it down up to 15 seconds
you do it either with engine runing . Or with engine off just turn key until your dash lights turn on

2007-02-19 18:47:08 · answer #5 · answered by davidblaze13 1 · 0 0

When I had a Honda a long time ago I would have to put the key into this slot on the console to reset it.
That was back in the mid to late 80's though.

2007-02-19 16:03:13 · answer #6 · answered by Kari 4 · 0 0

My integra had a little blue button just underneath the dash that resests the maintence light. You have to lay on your back by the pedals just to find it. Once you do hold it for about for a second or two and you should be good to go.

2007-02-19 17:49:04 · answer #7 · answered by the Animal 3 · 0 0

turn key to the "on" position-don't start it. hold the reset button down until it starts to blink. let it go and then hold it down again.
this time, the light will go solid and reset to 100%.

2007-02-21 04:57:17 · answer #8 · answered by HONDALUVA 2 · 1 0

fedest.com, questions and answers