2007-02-19 11:19:30 · 5 answers · asked by kingbeater 1 in Cars & Transportation ➔ Maintenance & Repairs
C4, C6, aod (automatic overdrive) and the four speed. The C4 is the cheapest option, but be aware there are many verities, you want one with at least 4 clutches. The C6 is the heavy duty auto, its bulletproof but harder to find. The aod will give the best mileage but are temper mental to get right and expensive. The four speed overdrive were week tranny's, you can also use the t-5. Good luck.
2007-02-19 11:33:34 · answer #1 · answered by mad_mav70 6 · 1⤊ 0⤋
Either a 4wd or 2wd. The stock automatic transmission of either will work behind a 302, 351 or 5.0. Bellhousing is the same. A ford t-5 straight shift will work also. Be sure you have the correct driveshaft, measure ! Didn't mention whether its a long or short bed.
2007-02-19 19:32:35 · answer #2 · answered by Warren 2 · 0⤊ 0⤋
a c-4 auto or a standard! A c-6 will not work c-6 is for big blocks and a 302 is not its a small block! Good luck
2007-02-20 10:03:38 · answer #3 · answered by baditude2075 2 · 0⤊ 0⤋
C-6 automatic would be best, a C-4 is likely not strong enough for a pickup.
If you want a standard, there were several used. I had the NP-435, which is great for a 4x4 or a tow vehicle, but the gearing is low if you do much highway driving. A newer 5-speed would work just fine.
2007-02-19 19:26:49 · answer #4 · answered by J.R. 6 · 0⤊ 1⤋
c4 or c6 trans also the 4 speed bulldog trans is good you might have to change the bell housing not sure
2007-02-19 19:28:17 · answer #5 · answered by south418 2 · 0⤊ 0⤋