I decided that our bathroom is boring. I want to paint or stencil designs on the sink and on the toilet. I was wondering, what type of paint can I use, and what do I put over the top of it to seal it? is it even possible to do this to a toilet?
Also, if I mess up, Can I get the paint off and start over (before I seal it, obviously)
I've never really done anything like this before so any information would be greatly appreciated. Thanks!
2007-02-19 10:58:38 · 10 answers · asked by Dani 7 in Home & Garden ➔ Do It Yourself (DIY)
I laughed at most of the answers above. Lowes sells a paint especially made to paint porcielen tubes, toilets and showers. It comes in white but is tintable and exspensive..
2007-02-20 08:57:12 · answer #1 · answered by captbob552 4 · 1⤊ 0⤋
If you REALLY want to try something new on your sink and toilet, stop by the local art supply store (like Michael's or Hobby Lobby) and check out the stencil section. They even have a gel type sticker that you can place on porcelain (and easily remove later) to see if you like the new look without being permanent. Once you've decided to go all out, then pick an acrylic paint, but nothing really sticks to the sealed porcelain surface and just an abrasive pad will remove it. You can always paint the toilet lid to liven things up - those are easily (and cheaply) replaced when the look grows old.
2007-02-19 11:08:17 · answer #2 · answered by tad p 1 · 1⤊ 0⤋
Without reading any answers I have some suggestions. First of all,,, DON'T.
Consider the substance and finish of those items you mention. They are basically GLASS. Beyond that, they are subject to high levels of use/abuse. You might swipe a line of paint over the porcelain, let dry, then rub a finger nail across it.
Sealing will not help at all. What might better serve you would be to have a "SEAT" that will accept your desire, and perhaps extend your desire to a border effect, on the walls surrounding both the sink and toilet.
I do see this similar Q asked often here, and always advise the same.
Steven Wolf
2007-02-20 00:01:13 · answer #3 · answered by DIY Doc 7 · 0⤊ 1⤋
It's called WHITE KNIGHT TUB ‘n‘ TILE EPOXY ENAMEL" available at most Menards, Lowe's or Home Depot. It comes in a kit that contains two cans that have to be mixed. It can also be tinted to any color. It is self-leveling so no brush marks are left. I've had great success with this. Please read the directions carefully & follow them accordingly and you should have no problems with this product. I have never used this to stencil designs, but after doing my tub & sink I do know it's a great product. I have not used a sealer & even after 3 years of normal use at my house of (5) it still shines like new. The cost was $32.00 for the kit at that time & it's worth every dime of it if you ask me. Here is a link for you & Good Luck!
2007-02-22 17:24:36 · answer #4 · answered by cinseb69 1 · 0⤊ 0⤋
Toilets and sinks are made with a porcelain coating. Not many things will stick to this and you can forget about using latex or oil paint, as they just won't stick. Of course there are professional companies that resurface tubs and stuff, but they'll just resurface in white and that won't get you anywhere. I can however, think of one thing that just might work but I don't know how long it'll last.
Go to your local craft and hobby store and buy Pebeo vitra glass and porcelain paint. It comes in small bottles and can be either transparent or opaque. You can use this paint on porcelain and glass dishes and things so it just might work... But like I said, I don't know how long it'll last because usually, you have to cook the items in the oven. Once the paint is dry, try using your blowdryer on it at the hottest setting to heat it.
Either way, if it doesn't stick, you won't have much trouble getting it off...
Good luck!
2007-02-19 13:37:29 · answer #5 · answered by The ReDesign Diva 7 · 1⤊ 1⤋
Bathrooms are supposed to be boring. Or, rather, peaceful. Places to relax your mind while you do whatever it is you went in there to do. The most I'd do to a bathroom is put a tile floor down with an interesting tile pattern, so I can figure out geometrical relationships while I wait for the evacuation to complete.
2007-02-19 11:05:26 · answer #6 · answered by blaringhorn 2 · 0⤊ 0⤋
you know if you go with a "white " the color from your sink and toilet will reflect off your walls thus giving you your blue theme. it is ez er to paint over a white wall than to paint over a color wall. id 1st try a "swiss coffee from dunn edwards paint store. then if you dont like the blue reflection you might like a light tan good luck
2016-05-24 17:56:10 · answer #7 · answered by Anonymous · 0⤊ 0⤋
It has to be a 2 part epoxy based, and sprayed on with an HVLP sprayer, clean & sand the surface to etch it, then mask around and spray thin coats. Very toxic.. gd lk.
Keep some solvent or reducer and rags handy for mistakes
2007-02-19 19:07:57 · answer #8 · answered by c&l w 1 · 0⤊ 1⤋
Believe me getting the paint off won't be a problem, see your fixtures are non-porous and the paint has nothing to adhere to so it's a bad idea , sorry.
2007-02-19 11:03:35 · answer #9 · answered by Les the painter 4 · 1⤊ 1⤋
you can't paint porcelin get stick on decals
2007-02-19 12:13:19 · answer #10 · answered by Anonymous · 2⤊ 1⤋