that will only shift into reverse. The shift lever stops dead if you try to put into nuetral or drive. Any suggestions as to what's wrong would be appreciated.
Is there any way to check the linkages without raising the car up?
2007-02-18 09:25:19 · 3 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Chevrolet
Haynes Manual
What you do is get the Haynes Repair Manual for your Year and model of vehicle at Auto Zone, or another automotive repair shop. The manual will show you what and how to do the repairs.
Might have a cotter key out of the linkage. Look underneath the truck on the drivers side. See if the steel rod linkage to the tranny is loose. You can at least do a visual.
Not shifting is that the linkage underneath is not connected to the tranny. The pin to keep the rod from not slipping came out and then the rod slipped out.
2007-02-18 09:33:11 · answer #1 · answered by Big C 6 · 0⤊ 0⤋
Linkage would be the easiest to check and fix first
2007-02-18 17:32:26 · answer #2 · answered by Just Me 2008 2 · 0⤊ 0⤋
Your stick is probley stuck. And that happened to me once. If you take it to a super walmart in the car department they'll fix easily!
2007-02-18 17:33:43 · answer #3 · answered by Yusaski Omhia 1 · 0⤊ 1⤋