kitchen mixer tap mesh insert?

Question

hi please can you help

my mixer tap in kitchen,well the mesh from inside the head unit fell out,so now the water sprays out eraticlly,there is a blue plastic insert still in the tap,
i have noticed the actual long head comes off,do you know,if i can just replace this part,rather than replacing the whole mixer taps and unit etc,as the unit isnt very old.
any ideas if and where to purchase

many thanks

Answer 1

You need an aerator, the best of which is made by Neoperl. A plumbers merchant should be able to help.

http://www.neoperl.net/net/english/products/aerators/index.fhtml

OR--

Neoperl (UK) Ltd
Nimrod Works
Enigma Business Park
Malvern
Worcestershire
WR14 1GH

Tel: [phone]
Fax: [phone]

Answer 2

There should be a threaded piece of brooker rod up in between the two pipes going to the tap, above that is a locking plate clamp. Pull the pipes aside and see if it's hidden behind them. The pipes can be either copper or flexible fittings. Have a good day.

Answer 3

Normally when you need to repair something like this you find that it's quite hard to find a replacement for it, The part that you need is only very small and as such, it's not the sort of item that places normally stock. Good luck, i think you will need to do a bit of rummaging around.

Answer 4

The mesh that fell out is an anti splash device. You should be able to push it back into position. If not, you can get one from a plumbers merchant.

Answer 5

well i am a interior decorator so i not my stuff.Try contacting whom you purchased the item from. failing that.drop me a line at
[e-mail]
and i will research it se if my business can help

Answer 6

go to B and Q they will tell you, or borrow your neighbours husband for 10 minutes!