Plastic decal (sign) I put on a year ago. want to remove it without scraping the paint. Top layer just peeled off but bit attached to vehicle won't budge.
2007-02-17 20:59:06 · 10 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
I'd try the hairdryer first, I've completely de sign written a van that way.
If you try any chemicals try them on a small piece of paintwork first to make sure they don't damage the paint.
2007-02-17 21:09:39 · answer #1 · answered by Anonymous · 0⤊ 0⤋
W D 4 0
2016-05-24 01:19:23 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Its simple
Warm the panel using a hair dryer and the glue will soften and you will be able to peel it off
You could use a hot air gun but be careful not to
A) burn the paint
and
B) burn your fingers
2007-02-18 09:04:51 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Try adhesive remover. It's sold at the hardware store next to the adhesives. Or if you have lighter fluid you can use that. That's pretty much what adhesive remover is.
2007-02-17 21:02:09 · answer #4 · answered by helloitsme 2 · 0⤊ 0⤋
I am assuming the "bit" to which you refer is the left-over adhesive... Goo-Gone, available from Wal-mart works good, and is relatively cheap...Mineral spirits work good, too... Ammonia works for some adhesives,as well... Good luck...
2007-02-17 21:11:33 · answer #5 · answered by mobileminiatures 5 · 0⤊ 0⤋
Use hot water,we did this on old ambulances it should just peel off.
2007-02-17 21:09:16 · answer #6 · answered by Francis7 4 · 0⤊ 0⤋
Use White Spirit or Cellulose Paint Thinners.
Do it slowly, Gently and Carefully.
2007-02-17 21:02:21 · answer #7 · answered by Earwigo 6 · 0⤊ 3⤋
hair dryer.
keep it moving, don't just hover one spot.
couple minutes of the heat moving around and it will peel right off.
2007-02-17 21:01:30 · answer #8 · answered by Anonymous · 2⤊ 0⤋
WD-40
2007-02-17 21:06:44 · answer #9 · answered by Anonymous · 0⤊ 1⤋
use hair dryer and then tar and glue remover
2007-02-18 01:18:29 · answer #10 · answered by stuartalan w 5 · 0⤊ 0⤋