I used a calibrated multimeter at a socket. I confirmed this reading with a new multimeter. What can i do about this? I think it may be responsible for my laptop needing 5 new motherboards in the last 18 months. Any comments welcome. Thanks.
2007-02-17 20:52:02 · 5 answers · asked by MMM OK 1 in Home & Garden ➔ Other - Home & Garden
Although your supply voltage is a bit on the high side , I doubt if it would affect your motherboard as your power supply unit will (should) still give out a stable output of 19.5 volts or whatever. Check the output from your PSU ON LOAD.
2007-02-17 21:45:04 · answer #1 · answered by jayktee96 7 · 0⤊ 0⤋
Use a laptop hooked up to an APC power protector.
If you get battery backup, combined with laptop battery, you should have an almost unlimited supply of juice. Just plug into the grid now n then to recharge, and your fine!
2007-02-17 21:40:37 · answer #2 · answered by Anonymous · 0⤊ 0⤋
I not from the UK I like Amanda the best Parker and Alex got voted out because their teammates Jen would be the best TV Jacob, would could have Sharon back, Josh does not Anyone but Allison
2016-03-29 01:04:59 · answer #3 · answered by Anonymous · 0⤊ 0⤋
I believe that the tolerance for power supply is nominal voltage plus or minus 6%. Plus 6% is 243.8 volts so yours is on the upper limit.
2007-02-17 21:17:22 · answer #4 · answered by David W 4 · 0⤊ 0⤋
Get on to your electricity suppler , controlled voltage coming from them should be between 238volts to 342volts max at 50 cycles , yes it could be the problem
2007-02-17 21:06:17 · answer #5 · answered by Anonymous · 0⤊ 0⤋