Its too small for the slot and went deep in when I tried to pull it out. Now I cant even touch it. Is there anyway I can get it out without having to get someone to dismantle my CPU?
2007-02-17 14:38:52 · 4 answers · asked by advante_87 2 in Computers & Internet ➔ Hardware ➔ Desktops
Its too small for the slot and went deep in when I tried to pull it out. Now I cant even touch it. Is there anyway I can get it out without having to get someone to dismantle my CPU
Its a memory card for a nokia phone, stuck in a SD card slot
2007-02-17 15:07:15 · update #1
And I thought I was the only one that had ever done that, with that said here is what worked for me. remove card reader from PC take note as to wiring then you can hold it with card slots down jiggle it around to get the little sucker to fall out. If you are pretty strong or have some help you may be able to get it out without removing reader from PC have someone to hold your PC face down then look in slot with a flash lite. then take a toothpick or Q-tip to maneuver it to the opening.
2007-02-25 04:31:29 · answer #1 · answered by johnnyjumpup2 2 · 0⤊ 0⤋
http://www.hpmuseum.org/disasm.htm
This site is pretty precise in what you need to do. Good Luck! Sorry but there is no other choice but to take your shell off and go from there.
Whatever you do, do not try to use a magnet to pull out the card, it will kill the other small drives!
2007-02-17 14:54:26 · answer #2 · answered by ebay_convert 5 · 0⤊ 0⤋
Get a set of long nose needle point pliers and get in there and pull it out.
2007-02-25 12:40:24 · answer #3 · answered by dcam47 2 · 0⤊ 0⤋
Yes you can get it out. What type of card are we talking here? Graphic etc......
2007-02-17 15:04:56 · answer #4 · answered by Racer 35 3 · 0⤊ 0⤋