How do I get my wireless USB adapter talking to my router?

Answer 1

Few things to check Have you set up a network up at home already as in another pc is already wireless ? no ...
ok you need to set up your router by connecting to the modem then connect to the pc this all has to be done by leads it lets the router know what your provider is and computer is ,the router should have a disc to install all this ,
if you already have another pc on a wireless connection and this is an additional pc you need to go start ,network setting and click on wireless and search for your network name .



normally leads don't come with the router and some do with leads basically you should have two leads one for modem to go into router and one for router to go into the pc when you have gone through all the set up you then remove the lead going to the pc only and then your pc is wireless.
it can be expensive buying one cable to do the wireless set up so even ask a few mates if they have a cable you can borrow its normally an ethernet cable that u need but with out your router in front of me i can't tell you what cables it needs

Answer 2

put the disk you got with the adapter into your cd rom and run it follow the instruction then plug in the adapter, wait until windows finds it and loads in the drivers, then in the task bar it you should have an icon you can right click one of the options will be view wireless networks left click on that, then search for available networks when your router shows up highlight it and click connect

Answer 3

you set up network name from the router so your wireless USB adapter can log on

Answer 4

when I run into different subject concerns as you're having I reset each thing to default and commence over. next, attempt changing the channel that your on the spot router announces from the default 6 to perchance 8 or 10. this ought to help with the dropouts and inconsistent document sharing subject concerns. attempt changing the call of your community Workgroup to a minimum of a few thing like HomeNet. particularly situations MS netbios subject concerns wreak havoc with on the spot networks so straying far flung from extremely some the default naming conventions would ward off flaky community habit. you additionally can decide to rename your SSID to a minimum of a few thing different than the default, turn off broadcasting of the SSID and attempt changing to WPA protection quite of WEP. i does not think of that the distributors of your on the spot contraptions ought to count number. I actually have a mix of Linksys, Netgear, Airlink101 and Belkin hardware on my on the spot community and each thing talks to a minimum of one yet another without difficulty. you need to be stable on that.

Answer 5

take the adapter to the routers house to sort out their differences or take them to family conflict centres