Can you use screws instead of nails when constructing wood framing for a room using dry wall as the cover?

Answer 1

You can but it isn't common. You'd be better off in this suggestion by constructing each wall as a unit laying down perhaps and hoisting it into place. Toenailing isn't exactly a valid way to go. In rough framing, nailing is faster, especially with an air powered nailer, and the likelyhood of snapping screws is possible.

I've been in the trades a long time, and there might be other "Old School" guys like me still out there, but a hammer in my world is for PULLING nails, on a framing job, or bending them over, or snapping them off, not Driving them.

Beyond that the air gun doesn't need to be plugged in and recharged.

If this is an interior DIY project and you have the time, certainly screwing the units together won't be any less effective than nailing, and I assume you realize that screws in drywall are also the way to go.

Steven Wolf

Answer 2

Framing Screws

Answer 3

It can be fixed! You hired someone who`s not much of a drywaller! I bet the ones sticking out the most, are in the centre area of the house! These should be pulled out! Use a thin piece of metal with a notch in it, slide over screw, and pull nail, this will avoid damage to area around nail.Install screw! Other nails can be banged back in, with a punch and hammer. End of punch should be almost the same size as nail head. After this is done you can simply dab texture over top of nail holes. In the center of a house near walls sometimes this is unavoidable, due to truss lift! In extremly cold climates the bottom cord of truss (which drywall is nailed to) will lift slighty off walls, this is because it is contained in the insulation of your attic, where it is warm, and the remaining wood of the truss is in the cold, causing it to contract and pull up the bottom cord.-- In these areas if nails pop I would remove but not replace with screws. This is close to walls only! Wall sheets will hold up ceiling sheets along walls. HOPE THIS HELPS! I think you should call drywall company to repair.----PLEASE do not use spackle to repair as others suggest just use texture same as whats already there, otherwise repair will be noticable!

For the best answers, search on this site https://smarturl.im/aDBAI

Answer 4

No. Nails bend, screws break. Screws are still made for drywall, although used for many other things. I can lead you to the man who built his scaffolding with screws instead of nails. He broke both legs falling when it SNAPPED. No warning.
Its the shear strength of nails that is important. Side to side. If you are looking for pull strength, you are doing something wrong. You also will have trouble building a wall on the floor and getting it in place unless its new construction. The joists will be in the way when you put it in place. Follow the directions in a remodeling book, and ask questions. Nails are code FOR A REASON! there are also standard nailing patterns and sizes to be aware of. That's why carpenters go to school and apprentice for 5 years...

Answer 5

Yes. Screws are a better fastener, but they cost more per unit and are much more labor intensive than nails. Just use the correct type and strength of screw. For examole do NOT use drywall screws to frame a room. Use a wood screw, they are stronger.

Answer 6

I know the perfect solution if you are just starting with woodworking and also if you have already experience with it. I reccomend to give a look to this website ( woodworkingplans.kyma.info ) You can find a lot of woodworking plans and you will be able to manage the projects with a CAD/DWG software. It allows you to modify the projects and to alter the arragements. If you are a beginner this is the easiest way to start, it's the best approach to woodworking; and if you already have experience you will find a lot of ideas and inspirations to improve your abilities with woodwork. I'm sure that you will love it!

Answer 7

Want you like to get instant access to over 16,000 woodworking plans?
Check it out https://tr.im/bf1bb
Along with stone, mud and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Answer 8

you can use screws as long as you counter sink them a little. although when you frame a wall your fastners are usually not in a location that will affect your sheetrock.i would advise using nails just for the sake of time.unless your afraid of smashing your thumb with a hammer, that is.

Answer 9

If you are planning to start on your woodworking project, this isn't something you should use, it's something that you would be insane not to. Go here https://tr.im/QKZXI
Truth is, I've been a carpenter for almost 36 years, and I haven't found anything like this for less than 10's of thousands of dollars.

Answer 10

If you have to find nice ideas for woodworking i can suggest you to check here http://www.goobypls.com/r/rd.asp?gid=294

It's perfect if you are just starting out or if you're a seasoned carpenter. you will like it for sure !
It has almost 20.000 woodworking plans and you have a CAD/DWG software to view and edit the plans. You have step-by-step instructions with photos and high quality blueprints and schematics. If you are a beginner this is the easiest way to start your woodworking projects, and if you already have experience you can anyway find a lot of interesting ideas!

Hope you will enjoy it :)