snow blower starts up but won't stay started...any quick fixes...3 feet of snow
2007-02-17 03:33:22 · 3 answers · asked by deewill153 1 in Home & Garden ➔ Maintenance & Repairs
does it have a choke? is it all the way in? is the gas new or old? is this the first time you used it? Did you remember to mix the oil and gas ? does it have seperate oil tank? sounds like it starts on the primer gas but won't run on the regular gas feed which should be a gravity feed. If you can see the carb, maybe remove the gas line and see if anything is coming out.
2007-02-17 05:01:37 · answer #1 · answered by zocko 5 · 0⤊ 0⤋
seems such as you forgot to run the carburetor dry final season and put in gas stabilizer interior the gas . i think of you will locate that the decide for the flow and jet at the instant are not putting out by way of this and maximum in all probability might desire to be rebuilt. one concern you are able to attempt is tapping the carburetor with a hammer. this might each now and then dislodge the decide for the flow and permit the gas by means of. you additionally can attempt a sprig can of carb medic. initiate the snowblower and attempt to maintain it working with the choke jointly as spraying carb medic into the carb. with any luck this might provide it sufficient of a cleansing to allow the jet and or decide for the flow to liberate and save working, If this works then save it working for a jointly as and it would start to run greater ideal. be specific you drain the gas out on the top of season and then initiate it to run the carburetor dry. good success Richard
2016-12-17 18:15:25 · answer #2 · answered by sollers 3 · 0⤊ 0⤋
Drain all fuel from tank, spray some carburetor cleaner into tank, blow out tank with compressed air, remove fuel filter, clean, drain all old fuel from fuel line. Put all back together add new fuel. Go and get the snow....
2007-02-17 03:45:58 · answer #3 · answered by RoeB 5 · 1⤊ 1⤋