English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

My left indicators on my bandit were both fine, now the front one on the left flashes real fast and the back one doesnt flash atall, im getting mini indicators soon, but i dont think thats the problem.

How could i fix this? could it be loose wireing?

Any help would be appriciated :) thanks

2007-02-17 03:09:05 · 7 answers · asked by Hb 2 in Cars & Transportation Motorcycles

ADD ON: SO IT COULD MEAN THE BACK BULB NEEDS REPLACING? THATS WHY THE FRONT IS TICKING FAST?

2007-02-17 03:22:41 · update #1

7 answers

Rapid turn signal flashing on modern motorcycles indicates that one of the bulbs is out. This is due to a lower load than the circuit is designed for, causing the relay to switch much more rapidly than normal - effectively a signal to the rider that one of his turn signals is not working (your owner's manual undoubtedly mentions this, BTW). You need to replace the rear turn signal bulb. Also, you need to use the standard incandescent bulb - if you replace it with an LED bulb, you will still get the rapid flashing, as the LED bulbs have such a low current draw that the turn signal relay again senses a too-low load on the circuit, causing it to flash in "bulb-failure" mode - installation of LEDs on a turn signal circuit requires installation of a load equalizer in the circuit, also.

2007-02-17 04:21:58 · answer #1 · answered by 310Pilot 3 · 0 1

that usually indicates that a bulb is burnt out, when one bulb burns out the other usually flashes faster, like sort of a indication that there is a problem.

2007-02-17 03:21:05 · answer #2 · answered by fredneck 2 · 0 0

No, do no longer replace the bulb. this can be a secret code put in through GM to grow to be conscious of a plausible new vehicle shopper. Take vehicle to nearest Pontiac broking and ask for the particular cost for vendors of this coded motorized vehicle. Heres your signal.....

2016-12-04 07:15:33 · answer #3 · answered by Anonymous · 0 0

the problem is simple. get the rear indicator bulb checked or the wiring related to it get it checked.
if the bulb is fused, replace it.

2007-02-17 03:24:44 · answer #4 · answered by yamaha 2 · 0 0

Try changing the bulb,,and/or cleaning the bulb socket

2007-02-17 03:14:25 · answer #5 · answered by Anonymous · 0 0

One bulb has failed in the turn signal arm.

2007-02-17 03:18:10 · answer #6 · answered by KennyW 2 · 0 0

^ what he said ^

2007-02-17 03:18:05 · answer #7 · answered by Eric J 4 · 0 0

fedest.com, questions and answers